Vinotemp VT18PTED2Z Manuale Proprietario

10 

 

 

You can solve many common wine cellar problems easily, saving you the cost of a possible service call. 
Try the suggestions below to see if you can solve the problem before contacting Vinotemp at 
info@vinotemp.com. 

Wine cellar does not 
operate 

•  Check if unit is plugged in. 

•  Check if using wrong voltage. 

•  Check for broken fuse. 

Wine cellar is not cold 
enough 

•  Check the temperature control setting. 

•  Ensure the wine cooler is away from heat sources and direct 

sunlight. 

•  The wine cellar does not have the correct clearance on all sides of 

the wine cooler. 

•  Ensure door is properly closed and fans are operating correctly. 

Wine cellar makes too much 
noise 

•  The wine cellar is not level. 

•  Check the fans inside the cooler and at the back of the unit. 

•  Check for proper ventilation and clearance. 

Internal light is flashing 

•  Check that selected temperature is not higher than internal cabinet 

temperature. 

•  Automatic defrost function has started. This is a normal function. 

Wine cooler has started to 
frost 

•  Excess humidity or very low temperatures may cause frost to build. 

Unplug the cooler and allow it to defrost or defrost by hand. 

Door will not close properly 

•  The wine cellar is not level. 

•  The doors were not properly installed. 

•  The seal is weak. 

•  The shelves are out of position. 

Temperature LeD display is 
blank 

•  Main control board does not work. 

•  The Power Control Board is not functioning. 

•  There is some problem with the plug (no power supply). 

Temperature LeD display 
error 

•  Temperature sensor is cut off. 

•  Display suffered too much wear and tear. 

Buttons are not functional 

•  Temperature controller panel is damaged.