Viking RVEWD330WH Guida All'Installazione

7

6

Cutout Dimensions

A

C

B

RVEWD

Cutout width (A)

28-1/4” (71.8 cm)

Cutout depth (B) 23-1/2” (59.7 cm)

Cutout height (C)

9-1/4” (23.5 cm)

Indoor

Flush Mount Option:
Note: To install the warming drawer in a flush mount application, a flush mount
accessory kit is required and sold separately.

RVEWD

Cutout width (A)

29-5/8” (75.3 cm)

Cutout depth (B) 25-1/8” (63.8 cm)

Cutout height (C) 10-1/8” (25.7 cm)

Electrical Requirements

WARNING

To avoid the risk of electrical
shock, personal injury or death;

verify electrical power is turned off at the
breaker box until the range is installed
and ready to operate, installation by an
authorized installer only.

RVEWD

Max. amp 
usage

450 watts

3.8 amps

Electrical Requirements

Check your national and local codes
regarding this unit. Hard wire direct with
seperate 120V/15 amp minimum 2-wire
wtih ground circuit. Maximum amp usage.

Electrical Connection

Note: Use copper conductors ONLY!

Grounding Instructions

This appliance must be connected to a
grounded metal, permanent wiring system,
or an equipment-grounding conductor
must be run with the circuit conductors and
connected to the equipment-grounding
terminal or lead on the appliance.

With the appliance positioned in front of
the cabinet opening, connect wire leads
extending from the power supply to the
terminal block of the unit. Make sure the
colored wires of the terminal block are
connected to the corresponding colored
wires extending from the power supply.