Marvel 8SWCEBSGLL Istruzione Sull'Installazione

Figure 17

3SWCE 4 bottles of wine per rack

The roll-out shelves each hold from 3 to 10 bottles per rack 

depending on model.  See Figure 16 to 19 for typical wine bottle 

spacing. Care should be taken when storing extra tall bottles in 

the wine cradle at the bottom of the compartment because they 

may prevent the door from closing.  

Keep wines that you plan to use for everyday drinking and enter-

taining on the front half of the racks where labels are completely 

visible.  Place wines for aging or longer term storing in the rear.

The roll-out wine racks may be pulled out approximately 14 

inches to facilitate adding or removing bottles. The bottom rack 

of model 6SDZE may be pulled out approximately 8 inches. Do 

NOT lean on or press down heavily on the wine shelves.  Doing 

so may damage the shelves and the wine bottles stored on them.  

Pull the wine racks out gently and carefully to minimize unset-

tling your wine collection.  Avoid pulling out more than one rack 

at any time to maintain stability.

The single level roll-out racks allow you to easily view and access 

your inventory without disturbing other bottles.

Figure 18

6SWCE, 6OSWCE, 6SDZE

8 bottles of wine per rack

Figure 16

3SWCCE 3 bottles of champagne per rack

Figure 19

8SWCE 10 bottles of wine per rack

22