Maytag MFC2062DEM Utilizzo E Cura

NOTE: Except when first turning on the refrigerator, do not 
adjust either temperature control more than one setting at a 
time. Wait 24 hours between adjustments for the temperature 
to stabilize. 

The PowerCold™ feature assists with periods of high refrigerator 
use, full grocery loads, or temporarily warm room temperatures.

■

Press the PowerCold™ touch pad to set the freezer and 
refrigerator to the lowest temperature settings. Press the 
PowerCold™ touch pad again to return to the normal 
refrigerator set point.

NOTE: The PowerCold™ feature will automatically shut off in 
approximately 12 hours.

The Max Ice feature assists with temporary periods of heavy ice 
use by increasing ice production.

■

Press the Max Ice touch pad to set the freezer to the lowest 
temperature setting. Press the Max Ice touch pad again to 
return to the normal freezer set point.

NOTE: When Max Ice is on, the (+) and (-) pads for the freezer 
control will not operate. The Max Ice feature will automatically 
shut off in approximately 24 hours.

The Humidity Control feature turns on a heater to help reduce 
moisture on the door hinge seal. Use in humid environments or 
when you notice moisture on the door hinge seal. The refrigerator 
uses more energy when Humidity Control is on.

■

Press Humidity Control when the environment is warm and 
more humid, or if you notice moisture on the door hinge seal. 
The indicator light will be lit when humidity control is ON. 

■

Press Humidity Control to save energy when the environment 
is less humid. 

The Temp Alarm feature provides temperature information in the 
event of a power outage.
Power outage: During a power outage, if the temperatures in the 
refrigerator and freezer compartments exceed normal operating 
temperatures, the highest temperature reached will be displayed.

■

Press the Temp Alarm touch pad until the indicator light is lit, 
to turn on this feature. Press and hold Temp Alarm for 
3 seconds until the indicator light goes off to turn off this 
feature. 

Temp Alarm: An alarm will sound repeatedly if the freezer or 
refrigerator compartment temperatures exceed normal operating 
temperatures for an hour or more.
The temperature displays will alternately show the current 
temperatures and the highest temperatures the compartments 
reached. 

■

Press the Temp Alarm touch pad once to stop the audible 
alarm and alternating temperature displays. The Temp Alarm 
light will continue to flash until the refrigerator returns to the 
set temperature.

The Door Alarm feature sounds a chime every few seconds when 
the refrigerator door has been left open for 5 continuous minutes. 
The chime will sound until the door is closed or Door Alarm is 
turned off.

■

Press the Door Alarm touch pad to turn this feature on or off. 
The indicator light will be lit when the Door Alarm feature is on. 

The Filter Reset control allows you to restart the water filter status 
tracking feature each time you replace your water filter. See 
“Water Filtration System.”

■

Press and hold the Filter Reset touch pad for 3 seconds, until 
the Order or Replace light turns off. 

The control center allows you to set user preferences, if desired. 

This preference allows you to change the temperature display.
F - Temperature in degrees Fahrenheit
C - Temperature in degrees Celsius 

This preference allows you to turn off the sound of all alarms.
ON - You will hear the alarm sound.
OFF - You will not hear the alarm sound.

REFRIGERATOR too warm

Adjust REFRIGERATOR 
Control 1° lower 

FREEZER too warm/too little ice 

Adjust FREEZER 
Control 1° lower

REFRIGERATOR too cold

Adjust REFRIGERATOR 
Control 1° higher

FREEZER too cold

Adjust FREEZER 
Control 1° higher