Maytag MFW2055DRE Scheda Tecnica

Pagina di 88
22
Temperature and Moisture 
PROBLEM
POSSIBLE CAUSES 
SOLUTIONS
Temperature is too warm
The refrigerator has just been installed
Allow 24 hours following installation for the refrigerator to 
cool completely.
Cooling is turned off
Turn on cooling. See “Using the Controls.”
The controls are not set correctly for 
the surrounding conditions
Adjust the controls a setting colder. Check the temperature in 
24 hours. See “Using the Control(s).”
The door(s) are opened often or not 
closed completely
Allows warm air to enter refrigerator. Minimize door openings 
and keep doors fully closed.
A large load of food was recently 
added
Allow several hours for refrigerator to return to normal 
temperature.
Temperature is too cold in 
the refrigerator/crisper
The refrigerator air vent(s) are blocked
If the air vent located in the top, left, rear corner of the 
refrigerator compartment is blocked by items placed directly 
in front of it, the refrigerator will get too cold. Move items 
away from the air vent.
The controls are not set correctly for 
the surrounding conditions
Adjust the controls a setting warmer. Check the temperature 
in 24 hours. See “Using the Controls.”
The ice storage bin is not in the 
correct position 
See “Ice Maker.”
Temperature is too cold in 
the pantry drawers
The control is not set correctly for the 
items stored in drawer
Adjust the control setting. See “Refrigerator Features.” 
There is interior moisture 
buildup
NOTE: Some moisture 
buildup is normal.
The room is humid 
A humid environment contributes to moisture buildup.
The door(s) are opened often or not 
closed completely
Allows humid air to enter the refrigerator. Minimize door 
openings and close doors completely.
The door is blocked open
Move food packages away from door.
A bin or shelf is in the way
Push bin or shelf back into the correct position.
Storing liquid in open containers
This adds humidity to the refrigerator interior. Keep all 
containers tightly covered.
There is frost/ice buildup in 
the freezer compartment
The doors are opened often or left 
open
Minimize door openings and keep doors fully closed.
Poor door seal 
Ensure door seals are making full contact with the 
refrigerator cabinet to allow for an adequate seal.
Temperature controls are not set 
correctly
See “Using the Controls” for recommended temperature 
settings.