Dacor DR30DLP Manuale
11
Oven Racks
You may use either rack type on any level.
warning
To reduce the chance of burns, position the oven racks
when the oven is cool. If you must reposition a rack
when the oven is hot, use potholders.
To insert the standard oven racks:
Insert the end of the rack with the safety notches into
1.
the oven first.
Attach both sides of the rack to the rack supports in
Attach both sides of the rack to the rack supports in
2.
the oven as shown in the diagram below.
Begin to slide the rack in, and then, lift up so that the
Begin to slide the rack in, and then, lift up so that the
3.
safety notches clear the ends of the rack supports.
Push the rack all the way in with both hands.
Push the rack all the way in with both hands.
4.
To remove the standard oven racks:
Grasp the rack with both hands and pull gently
1.
straight out toward you until it stops.
To remove the rack completely, lift the front of the
To remove the rack completely, lift the front of the
2.
rack up about six inches and continue to pull it out.
Lifting the rack releases the safety notches. The
safety notches reduce the chances of a rack coming
out of the oven accidentally.
Operating the Oven
To insert the optional GlideRack
™
oven rack:
You can pull the optional GlideRack oven rack out further
than the included standard racks and still support heavy
pots and pans full of food. It is great for heavier foods and
the optional Dacor baking stone.
Hold the rack with the guides fully extended away
1.
from you (see the diagram below).
Align both sets of safety clips (right and left) on the
Align both sets of safety clips (right and left) on the
2.
back of the guides with the oven rack supports as
shown.
Begin to slide the rack in, lifting the front safety clips
Begin to slide the rack in, lifting the front safety clips
3.
over the front of the oven rack supports.
Push the rack all the way to the back.
Push the rack all the way to the back.
4.
Grasp the rack in the center of the front and pull. The
5.
rack should come forward while the guides remain in
place.
To remove the optional GlideRack oven rack:
Grasp it with both hands and pull gently straight out
1.
toward you until it stops.
To remove the rack completely, lift the front up about
To remove the rack completely, lift the front up about
2.
six inches and continue to pull it out. Lifting it releases
the safety clips. The safety clips reduce the chance of
the rack coming out of the oven accidentally.
Front of rack
Standard oven rack
optional gliderack oven rack
Back of rack
Rack support
Slide oven rack
supports into
slots on the rack
Safety notch
Slide rack supports
between back safety clips
Lift front safety clips
over rack supports
Front of rack
Guides
Rack support