HP 23-R010 Manuale Proprietario

Confirm that the mouse is on (A), and then press and hold the Connect button (B) on the underside of the mouse 

for 5 to 10 seconds until the LED on the transceiver lights up or stops flashing. The transceiver connection 

session times out after 60 seconds. To confirm that the connection was established, and that the transceiver did 

not time out, move the mouse, and then check for a response on the screen.

If the keyboard is not responding, press and hold the Connect button (C) on the underside of the keyboard for 5 

to 10 seconds, until the LED on the transceiver lights up or stops flashing.

Volume is very low or 

unsatisfactory

Be sure that you connected the speakers to the audio-out (black) jack on the back of the computer. (Additional audio 

jacks are used for multiple-channel speakers.) Detached non-powered speakers (speakers without a separate power 

source, such as batteries or a power cord) do not produce satisfactory sound. Replace the non-powered speakers with 

powered speakers.

No sound is produced

From the Start screen, type control panel, and then select Control Panel. Or, from the Windows desktop, 
right-click the Start button, and then select Control Panel. Select System and Security.

Under Action Center, select Troubleshoot common computer problems, and then select Troubleshoot audio 

playback.

Be sure that you connected powered speakers and that they are turned on.

12

Chapter 5   Troubleshooting