Maytag MSB26C6MDE Istruzione Sull'Installazione

The disposable pouches should be replaced every 6 months, 
when the status indicator has completely changed from white to 
red. 
To order replacements, see “Accessories” in the User Instructions 
or User Guide. 
1. Remove the old pouches from the Produce Preserver housing.
2. Remove the old status indicator.
3. Install the new pouches and status indicator using the 

instructions in the previous sections.

The water filter status light will help you know when to change 
your water filter. See “Water Filtration System” in the User 
Instructions or User Guide.
NOTE: If water flow to your water dispenser or ice maker 
decreases noticeably, change the filter sooner. The filter should be 
replaced at least every 6 months, depending on your water quality 
and usage.  

1. Locate the water filter in the top-right corner of the refrigerator 

compartment.

2. Lift open the filter cover door. The filter will be released and 

then be ejected as the door is opened.

3. When the door is completely open, pull the filter straight out.

NOTE: There may be some water in the filter. Some spilling 
may occur. Use a towel to wipe up any spills.

4. Take the new filter out of its packaging and remove the cap. 

Be sure the O-rings are still in place after the cap is removed.  

5. With the arrow pointing up, align the new filter with the filter 

housing and slide it into place. The filter cover door will 
automatically begin to close as the new filter is inserted.

6. Close the filter cover door completely in order to snap the filter 

into place. You may need to press hard.

7. After changing the filter, reset the filter status light. See “Water 

Filtration System” in the User Instructions or User Guide.

8. Flush the water system. See “Water and Ice Dispensers” in the 

User Instructions or User Guide.

Both the refrigerator and freezer sections defrost automatically. 
However, clean both sections about once a month to avoid 
buildup of odors. Wipe up spills immediately.
IMPORTANT: Because air circulates between both sections, any 
odors formed in one section will transfer to the other. You must 
thoroughly clean both sections to eliminate odors. To avoid odor 
transfer and drying out of food, wrap or cover foods tightly.

NOTE: Do not use abrasive or harsh cleaners such as window 
sprays, scouring cleansers, flammable fluids, cleaning waxes, 
concentrated detergents, bleaches or cleansers containing 
petroleum products on plastic parts, interior and door liners or 
gaskets. Do not use paper towels, scouring pads, or other harsh 
cleaning tools.
1. Unplug refrigerator or disconnect power.
2. Hand wash, rinse, and dry removable parts and interior 

surfaces thoroughly. Use a clean sponge or soft cloth and a 
mild detergent in warm water. 

3. Wash stainless steel and painted metal exteriors with a clean 

sponge or soft cloth and a mild detergent in warm water. 

4. There is no need for routine condenser cleaning in normal 

home operating environments. If the environment is 
particularly greasy or dusty, or there is significant pet traffic in 
the home, the condenser should be cleaned every 2 to 
3 months to ensure maximum efficiency.
If you need to clean the condenser:

■

Remove the base grille. See the “Door Removal” 
instructions, either in the User Instructions or the 
Installation Instructions and Owner’s Manual, or in the 
separate instruction sheet provided with your refrigerator.

■

Use a vacuum cleaner with a soft brush to clean the grille, 
the open areas behind the grille and the front surface area 
of the condenser.

■

Replace the base grille when finished.

5. Plug in refrigerator or reconnect power.

Do not use with water that is microbiologically unsafe or 
of unknown quality without adequate disinfection before 
or after the system. Systems certified for cyst reduction 
may be used on disinfected waters that may contain 
filterable cysts.

B

B

A