Maytag MSB26C6MDE Istruzione Sull'Installazione

■

Place the right end of the light shield into the wall slots, then 
snap the left end into its wall slots.

■

Gently squeeze the front and the bottom-rear edge of the light 
shield to release the tabs from the wall slots, then pull the light 
shield forward.

■

If the burned-out light is a full-size LED bulb, replace it with 
Whirlpool part number W10565137A (a 3.6 watt LED bulb).

■

If the burned-out light is an incandescent bulb, replace it with 
an incandescent appliance bulb of the same size, shape and 
wattage (40-watt maximum). 

■

Align the light shield in its proper position, and snap the tabs 
into the wall slots.

■

Slide the light shield to the left to remove the right end from 
the wall slots, then pull the left end out of its wall slots.

■

If the burned-out light is a full-size LED bulb, replace it with 
Whirlpool part number W10565137A (a 3.6 watt LED bulb).

■

If the burned-out light is an incandescent bulb, replace it with 
an incandescent appliance bulb of the same size, shape and 
wattage (40-watt maximum). 

■

Place the left end of the light shield into the wall slots, then 
snap the right end into its wall slots.

1. Use up any perishables and freeze other items.
2. If your refrigerator has an automatic ice maker and is 

connected to the household water supply, turn off the water 
supply to the refrigerator. Property damage can occur if the 
water supply is not turned off. 

3. If you have an automatic ice maker, turn off the ice maker. 

NOTE: Depending on your model, raise the wire shutoff arm to 
OFF (up) position or press the switch to OFF (right).

4. Empty the ice bin.
If You Choose to Turn Refrigerator Off Before You Leave:

1. Remove all food from the refrigerator.
2. If your refrigerator has an automatic ice maker:

■

Turn off the water supply to the ice maker at least one day 
ahead of time.

■

When the last load of ice drops, raise the wire shutoff arm 
to the OFF (up) position or move the switch to the OFF 
(right) setting.

3. Depending on the model, turn the Refrigerator Control to OFF 

or turn cooling off. See “Using the Controls” in the User 
Instructions, User Guide, or Use & Care Guide.

4. Clean, wipe, and dry thoroughly.
5. Tape rubber or wood blocks to the tops of both doors to prop 

them open far enough for air to get in. This stops odor and 
mold from building up.

When you are moving your refrigerator to a new home, follow 
these steps to prepare it for the move.
1. If your refrigerator has an automatic ice maker:

■

Turn off the water supply to the ice maker at least one day 
ahead of time.

■

Disconnect the water line from the back of the refrigerator.

■

When the last load of ice drops, raise the wire shutoff arm 
to the OFF (up) position or move the switch to the OFF 
(right) setting.

2. Remove all food from the refrigerator and pack all frozen food 

in dry ice.

3. Empty the ice bin.