Philips 55PFL4609/F7 Manuale Utente

Initial Setup

This section will guide you through the Unit’s Initial setting which includes
selecting a Language for your On-screen Menu, country, location and
Autoprogram, which Automatically scans and memorizes viewable
channels. You can also set the network connection in this setting.

Make sure the Unit is connected to an Antenna or Cable.

1

After making All the Necessary Connections, press B to Turn On
the Unit.

●

It may take a few moments to Turn On the Unit for the first time.

●

Initial setup menu appears Automatically after the Unit is Turned
On.

2

Use H I to select the on-screen language, country, TV placement,
location on the right side of the TV screen, then press OK.

●

You must set Home in location setting. Otherwise, Picture and
Sound settings you adjusted will not be memorized after the Unit
goes into Standby mode.

3

Use H I to select the signal type.

●

If the TV is connected to a Cable or Satellite Set-top box, select
the 2nd one and skip to step 5.

Select

  

box or satellite TV receiver.

To set up a TV signal from a cable TV

Select

  

wall jack or a standard TV antenna.

To set up a TV signal from a cable TV

4

Use H I to select Antenna for TV channels or Cable for CATV
channels, then press OK.

Skip

Cable

Antenna

  

  

OK button to proceed.

made your selection, press the

remote control. Once you have

Cable, using up/down key of the

Now select either Antenna or

  

of your TV labeled "ANTENNA IN".

signal into the jack on the back

attached your antenna or cable

Make sure that you have

–

When Antenna is selected, the TV detects Antenna signals. It
searches for DTV and Analog TV channels available in your area.

–

When Cable is selected, the TV detects signals supplied by
cable. It searches for DTV, Analog TV and Cable channels
available in your area.

●

Autoprogram will begin.

0

0

 

Stop

  

the Auto Programming complete message.

to find and program. Please wait until you see

complete. Digital channels will take longer than Analog

Auto programming may take more than 20 minutes to

Analog channels found:

Digital channels found:

System searching. Please wait…

5

After the channel installation is completed, Network setup screen
will appear. Use H I to select Wireless or Wired, then press OK.

Skip

Wired

Wireless

Select your connection type.

your Internet home network.

This TV can be connected to

Wireless

If you have a Wireless router, select Wireless to
connect to the Internet.

Wired

If you connect with an Ethernet cable, select Wired
to connect to the Internet.

●

If you have a router with WPS function, select Wireless and use
H

 I to select Easy Connect, then press OK.

6

Follow the on-screen instructions to complete the installation.

●

When you select On in the selection screen for Auto software
update. A message will appear if there is the latest software on the
network server.

7

Use J K to select Start, then press OK to begin Settings
assistant.

Start

Cancel

The energy consumption in the “Standard” setting is Energy Star certified.

differ. Select the side that is most pleasing to you with the Left/ Right buttons.

preference. You will see a series of test pictures where the right side and left side

Settings assistant will allow you to customize your picture settings to your personal

8

Press J or K 5 times to select the side of the pictures that is the
most pleasing to you, then press OK.

Picture B

Picture A

Cancel

Which side of the picture do you prefer?

20

.

English

Continued on next page.