Yamaha RXA3040 Manuale Proprietario

CONFIGURATIONS

➤ Configuring various functions (Setup menu)

En

■

Configures the output characteristics of the speakers.

• When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm 

(6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”).

Selects the size of the front speakers.

• “Front” is automatically set to “Large” when both “Subwoofer 1” and “Subwoofer 2” are set to “None”.

Selects whether or not a center speaker is connected and its size.

Selects whether or not surround speakers are connected and their sizes.

Selects whether or not surround back speakers are connected and their sizes.

7ch 
+FRONT+1ZONE

Select this when you use 7-channel speakers plus front channel 
expansion using an external amplifier in the main zone and Zone3 (or 
Zone2) speakers (p.29).
You can select a zone to be assigned to the EXTRA SP 2 jacks 
(default: Zone3).

5ch 
+FRONT+2ZONE

Select this when you use 5-channel speakers plus front channel 
expansion using an external amplifier in the main zone, plus Zone2 
and Zone3 speakers (p.29).
You can select a zone to be assigned to the EXTRA SP 1 jacks 
(default: Zone2) and EXTRA SP 2 jacks (default: Zone3).

7ch BI-AMP

Select this when you use 7-channel speakers (including bi-amp front 
speakers) (p.26).

7ch BI-AMP 
+1ZONE

Select this when you use 7-channel speakers (including bi-amp front 
speakers) in the main zone and Zone3 (or Zone2) speakers (p.26).
You can select a zone to be assigned to the EXTRA SP 2 jacks 
(default: Zone3).

7ch BI-AMP +FP+RP

(RX-A3040 only)
Select this when you use 7-channel speakers (including bi-amp front 
speakers), plus front presence and rear presence channel expansion 
using an external amplifier (p.27).

Large

Select this option for large speakers.
The front speakers will produce all of the front channel frequency 
components.

Small

Select this option for small speakers.
The subwoofer will produce front channel low-frequency components 
lower than the specified crossover frequency (default: 80 Hz).

Large

Select this option for large speakers.
The center speaker will produce all of the center channel frequency 
components.

Small

Select this option for small speakers.
The subwoofer or front speakers will produce center channel 
low-frequency components lower than the specified crossover 
frequency (default: 80 Hz).

None

Select this option when no center speaker is connected.
The front speakers will produce center channel audio.

Large

Select this option for large speakers.
The surround speakers will produce all of the surround channel 
frequency components.

Small

Select this option for small speakers.
The subwoofer or front speakers will produce surround channel 
low-frequency components lower than the specified crossover 
frequency (default: 80 Hz).

None

Select this option when no surround speakers are connected.
The front speakers will produce surround channel audio. Virtual 
CINEMA DSP works when you select a sound program.

Large x1

Select this option when one large speaker is connected.
The surround back speaker will produce all of the surround back 
channel frequency components.

Large x2

Select this option when two large speakers are connected.
The surround back speakers will produce all of the surround back 
channel frequency components.