Yamaha RXA3040 Manuale Proprietario

CONFIGURATIONS

➤ Configuring various functions (Setup menu)

En

• This setting is not available when “Surround” is set to “None”, or when “Layout (Surround)” is set to 

“Front”.

Selects whether or not front presence speakers are connected and their size.

Selects whether or not rear presence speakers are connected and their size.

• This setting is not available when “Surround” or “Front Presence” is set to “None”.

Selects whether or not a subwoofer is connected to the SUBWOOFER 1 or 
SUBWOOFER 2 jack and its phase.

• When the bass sound is lacking or unclear, switch the subwoofer phase.

Selects the layouts of the surround speakers, front/rear presence speakers and 
subwoofers.

Selects a surround speaker layout when surround speakers are used.

• This setting is not available when “Configuration (Surround)” is set to “None”.

Small x1

Select this option when one small speaker is connected.
The subwoofer or front speakers will produce surround back channel 
low-frequency components lower than the specified crossover 
frequency (default: 80 Hz).

Small x2

Select this option when two small speakers are connected.
The subwoofer or front speakers will produce surround back channel 
low-frequency components lower than the specified crossover 
frequency (default: 80 Hz).

None

Select this option when no surround back speakers are connected.
The surround speakers will produce surround back channel audio.

Large

Select this option for large speakers.

Small

Select this option for small speakers.

None

Select this option when no front presence speakers are connected.

Large

Select this option for large speakers.

Small

Select this option for small speakers.

None

Select this option when no rear presence speakers are connected.

Use

Normal 

Select this option when a subwoofer is connected to the 
SUBWOOFER 1 or SUBWOOFER 2 jack (phase not reversed). The 
subwoofer will produce LFE (low-frequency effect) channel audio and 
low-frequency components from other channels.

Reverse

Select this option when a subwoofer is connected to the 
SUBWOOFER 1 or SUBWOOFER 2 jack (phase reversed). The 
subwoofer will produce LFE (low-frequency effect) channel audio and 
low-frequency components from other channels.

None

Select this option when no subwoofer is connected to the 
SUBWOOFER 1 or SUBWOOFER 2 jack. The front speakers will 
produce LFE (low-frequency effect) channel audio and low-frequency 
components from other channels when both “Subwoofer 1” and 
“Subwoofer 2” are set to “None”.

Rear

Select this option when surround speakers are placed on the rear side 
of the room.

Front

Select this option when surround speakers are placed on the front 
side of the room. Virtual CINEMA FRONT (p.73) works in this case.