Samsung FE-R300SB/XAA Manuale Proprietario

42_ Troubleshooting

The oven controls were not set 
correctly.

See the section on self-cleaning on page 

•

31.

The oven was heavily soiled.

Wipe up heavy spillovers before starting 

•

the self-cleaning cycle. Heavily soiled 
ovens may need to self-clean again or for 
a longer period of time.

Steam from the vent When using the convection 

feature, it is normal to see steam 
coming out of the oven vent.

This is normal.

•

As the number of racks or amount 
of food being cooked increases, 
the amount of visible steam will 
increase.

This is normal in a new oven and 
will disappear in time.

To speed the process, set a self-cleaning 

•

cycle for a minimum of 3 hours.

See the section on self-cleaning on page 

•

31.

An odor from the insulation around 
the inside of the oven is normal 
for the first few times the oven is 
used.

This is temporary.

•

The shiny, silver-colored racks 
were cleaned in a self-cleaning 
cycle.

Apply a small amount of vegetable oil to 

•

a paper towel and wipe the edges of the 
oven racks with the paper towel.

Display goes blank. A fuse in your home may be blown 

or the circuit breaker tripped.

Replace the fuse or reset the circuit 

•

breaker.

There was a power failure.

Reset the clock.

•

The drawer is out of alignment.

Fully extend the drawer and push it all the 

•

way in. See the page 38.

The drawer is over-loaded or the 
load is unbalanced.

Reduce weight. Redistribute drawer 

•

contents.

FE-R300_XAA DG68-00277A.indd   42

2010-01-20   �� 12:10:00