HP OJ 3830 Manuale Proprietario

Some ISDN systems allow you to configure the ports for specific phone equipment. For

example, you might have assigned one port for telephone and Group 3 fax and another port for multiple

purposes. If you have problems when connected to the fax/phone port of your ISDN converter, try using

the port designated for multiple purposes; it might be labeled "multi-combi" or something similar.

●

If you are using a PBX phone system, set the call waiting tone to "off."

Many digital PBX systems include a call-waiting tone that is set to "on" by default. The call

waiting tone interferes with any fax transmission, and you cannot send or receive faxes with the printer.

Refer to the documentation that came with your PBX phone system for instructions on how to turn off

the call-waiting tone.

●

If you are using a PBX phone system, dial the number for an outside line before dialing the fax number.

●

Make sure you use the supplied cord to connect from the telephone wall jack to the printer. If you do

not, you might not be able to fax successfully. This special phone cord is different from the phone cords

you might already have in your home or office. If the supplied phone cord is too short, you can purchase

a longer 2-wire phone cord from your local electronics store and extend it.

You might need to connect the supplied phone cord to the adapter provided for your country/region.

If you encounter problems setting up the printer with optional equipment, contact your local service provider

or vendor for further assistance.

If you subscribe to a distinctive ring service (through your telephone company) that allows you to have

multiple phone numbers on one phone line, each with a different ring pattern, set up the printer as described

in this section.

  Back view of the printer

1

Telephone wall jack

2

Use the phone cord supplied in the box with the printer to connect to the 1-LINE port.

You might need to connect the supplied phone cord to the adapter provided for your country/region.

Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack,

then connect the other end to the port labeled 1-LINE on the back of the printer.

ENWW

Set up faxing (parallel phone systems) 161