HP OJ 3830 Manuale Proprietario

You might need to connect the supplied phone cord to the adapter provided for your country/

region.

If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not

be able to fax successfully. This special phone cord is different from the phone cords you might already

have in your home or office.

Turn on the Auto Answer setting.

Change the Distinctive Ring setting to match the pattern that the telephone company assigned to your

fax number.

By default, the printer is set to answer all ring patterns. If you do not set the Distinctive Ring

to match the ring pattern assigned to your fax number, the printer might answer both voice calls and

fax calls or it might not answer at all.

You can also use the Ring Pattern Detection feature in the printer control panel to set distinctive

ring. With this feature, the printer recognizes and records the ring pattern of an incoming call and,

based on this call, automatically determines the distinctive ring pattern assigned by your telephone

company to fax calls. For more information, see 

(Optional) Change the Rings to Answer setting to the lowest setting (two rings).

Run a fax test.

The printer automatically answers incoming calls that have the ring pattern you selected (Distinctive Ring

setting) after the number of rings you selected (Rings to Answer setting). The printer begins emitting fax

reception tones to the sending fax machine and receives the fax.

If you encounter problems setting up the printer with optional equipment, contact your local service provider

or vendor for further assistance.

If you receive both voice calls and fax calls at the same phone number, and you have no other office

equipment (or voice mail) on this phone line, set up the printer as described in this section.

  Back view of the printer

1

Telephone wall jack

162 Appendix B   Additional fax setup

ENWW