Philips SPD8020CC/05 Manuale Utente

31

 

 

Maintenance 

 

Firmware update 

 

CAUTION 

1.  Never turn off your NAS during the firmware update procedure. This may damage your device. If for 

any reason (E.g. Power supply failure during firmware update) the procedure fails, you may not be 
able to operate your device. 

2.  Always use Philips firmware. 

 

 

 

Option 1 – Automatic firmware download 

1.  Visit the Philips Intelligent Agent website at 

www.storageupdates.philips.com/en/pia.html

  

 

2.  Read the instructions mentioned on the page, 

on how to install and run the Philips Intelligent 

Agent 

 

3.  Proceed at ‘Firmware update’ below 

 
The Philips Intelligent Agent can also be found on your 

 

 

Option 2 – Manual firmware download 

1.  Visit the Philips support website at 

www.philips.com/storageupdates

  

 

2.  Go to the section of the NAS 

 

3.  Download the latest firmware (zipfile) to your 

PC 

 

4.  Proceed at ‘Firmware update’ below 

 

 

 

 

 

Firmware update  

1.  Extract the firmware image file from the zipfile 

 

2.  Connect your NAS to your network 

 

3.  Switch on the NAS 

 

4.  Use the ‘Manage’ button in the Philips 

network storage wizard to open the NAS 

administration console 

 
Or use the ‘Manage’ shortcut on your desktop