3com WX1200 3CRWX120695A Manuale Utente

C

HAPTER

 11: M

ANAGED

 A

CCESS

 P

OINT

 C

OMMANDS

History —Introduced in MSS Version 3.0. Version 6.0 removed the dap 
option.

Usage — The serial-id parameter displays the active connection for the 
specified Distributed MAP even if that MAP is not configured on this WX 
switch. If you instead use the command with the dap-num parameter or 
without a parameter, connection information is displayed only for 
Distributed MAPs that are configured on this WX switch.

This command provides information only if the Distributed MAP is 
configured on the switch where you use the command. The switch does 
not need to be the one that booted the MAP, but it must have the MAP in 
its configuration. Also, the switch that booted the MAP must be in the 
same Mobility Domain as the switch where you use the command.

If a Distributed MAP is configured on this WX switch (or another WX switch 
in the same Mobility Domain) but does not have an active connection, the 
command does not display information for the MAP. To show connection 
information for Distributed MAPs, use the display ap global command on 
one of the switches where the MAPs are configured.

Examples — The following command displays information for all 
Distributed MAPs configured on this WX switch that have active 
connections:

WX1200# display ap connection 

Total number of entries: 2

AP  Serial Id   

AP IP Address

WX IP Address 

--- ----------- 

--------------- ---------------

2 

M9DE48B012F00 10.10.2.27

10.3.8.111     

4

 M9DE48B123400 10.10.3.34

10.3.8.111 

The following command displays connection information specifically for a 
Distributed MAP with serial ID M9DE48B6EAD00:

WX1200# display ap connection serial-id M9DE48B6EAD00

Total number of entries: 1

DAP Serial Id   

DAP IP Address

WX IP Address 

--- ----------- 

--------------- ---------------

9   M9DE48B6EAD00 10.10.4.88

10.9.9.11     

Table 65 describes the fields in this display.