3com WX1200 3CRWX120695A Manuale Utente
346
C
HAPTER
11: M
ANAGED
A
CCESS
P
OINT
C
OMMANDS
Examples — The following command displays configuration information
for all the Distributed MAPs configured on a WX switch:
for all the Distributed MAPs configured on a WX switch:
WX4400# display ap global
Total number of entries: 8
AP Serial Id
WX IP Address Bias
--- -----------
--------------- ----
1
M9DE48B012F00 10.3.8.111 HIGH
-
M9DE48B012F00 10.4.3.2 LOW
2
M9DE48B123400 10.3.8.111 LOW
-
M9DE48B123400 10.4.3.2 HIGH
17 M9DE48B123600 10.3.8.111 HIGH
-
M9DE48B123600 10.4.3.2 LOW
18 M9DE48B123700 10.3.8.111 LOW
-
M9DE48B123700 10.4.3.2 HIGH
Table 66 describes the fields in this display.
See Also
Table 66 Output for display ap global
Field
Description
AP
ID assigned to the Distributed MAP.
Note: AP numbers are listed only for Distributed MAPs
configured on this WX switch. If the field contains a
hyphen ( - ), the Distributed MAP configuration displayed in
the row of output is on another WX switch.
configured on this WX switch. If the field contains a
hyphen ( - ), the Distributed MAP configuration displayed in
the row of output is on another WX switch.
Serial Id
Serial ID of the Distributed MAP.
WX IP Address
System IP address of the WX switch on which the Distributed
MAP is configured. A separate row of output is displayed for
each WX switch on which the Distributed MAP is configured.
MAP is configured. A separate row of output is displayed for
each WX switch on which the Distributed MAP is configured.
Bias
Bias of the WX switch for the MAP:
High
Low