Desa VDCFTPB Manuale Utente

www.desatech.com

116526-01B

opERaTiNG FiREplaCE

Continued

OPTIONAL HAND-HeLD

ReMOTe OPeRATION

Note:

All remote control accessories must

be purchased separately (see Accessories,

page 40). Follow instructions included with

the remote control.

NOTICe: You must light the pilot

before using the hand-held re-

mote control unit. See Lighting

Instructions on page 23.

1. After lighting, let pilot flame burn for

about one minute. Turn control knob to

ON position. Adjust flame adjustment knob

anywhere between HI and LO. Slide the

selector switch to the REMOTE position

(see Figure 41). Note: The burner may light

if hand-held remote was on when selector

switch was last turned off. You can now

turn the burner on and off with the hand-

held remote control unit.

IMPORTANT: Do not leave the selector switch

in the REMOTE or ON position when the

pilot is not lit. This will drain the battery.

ON/OFF SeRIeS (MODeL HRC100)

Hold the control button on the hand-held remote

until burner turns on. Hold the control button

again until burner turns off (see Figure 42).
To Lock

press both buttons on hand-held

remote control until light stops flashing. Hand-

held remote control is now locked. If the fire is

on it will be turned off automatically. In the

locked state, the light will not light up when

any button is pressed.
To Unlock

press both buttons together on

hand-held remote control until the light

stops flashing. The hand-held remote is now

unlocked.

THERMOSTAT SERIES (MODEL
HRC200)

The hand-held remote can be operated using

either the manual mode (MANU) or thermo-

static mode (AUTO) (see Figure 43). To select

Fahrenheit/Centigrade mode display, carefully

press the ˚C/˚F mode button with the end of a

paper clip or similar blunt object.

Figure 41 - Setting the Selector Switch,

Control Knob and Flame Adjustment

Knob for Remote Operation

Flame
Adjustment Knob

Control
Knob

Selector Switch in Remote
Position (Optional Remote Control)

Figure 43 - Thermostat Hand-Held

Remote Control Unit

Manual Mode

1. Press the POWER and LOCK buttons

together to turn on the hand-held remote

control.

2. Press the MANU button to turn on the

fireplace.

3. Press the POWER and LOCK buttons

together to turn off the fireplace.

Figure 42 - ON/OFF Hand-Held Remote

Control Unit

Control
Button

Indicator
Light

LOCK

MANU

AUTO

ºC/ºF

TEMP

POWER

ROOM
TEMP

SET
TEMP

AUTO

Turns
Hand-Held
Remote On
or Off and
Allows You
to Choose
the Manual
Setting

Selects
AUTO
Mode

°C/°F
Mode
Button

Locks
System to
Prevent
Accidental
Ignition

Turns
Burners
On or
Off

Increases or
Decreases
Room
Temperature
in AUTO Mode

Digital Display Shows
Temperature and Settings

Indicator
Light