Hobie Tiger Manuale Utente
9
Mast Set-up
Place the mast onto two supports (eg: two
pieces of polystyrene).
pieces of polystyrene).
Unroll the trapeze wires and fix them using a
shackle to the upper hole on the mast tang (two
on each side).
shackle to the upper hole on the mast tang (two
on each side).
1
Unroll the shrouds and the forestay wire (with
the jib halyard block) and fix them to the lower
hole of the mast tang using a shackle. The
shrouds go onto each side of the forestay.
the jib halyard block) and fix them to the lower
hole of the mast tang using a shackle. The
shrouds go onto each side of the forestay.
Trapeze wires
Trapeze wires
Shrouds
Forestay
2
IMPORTANT
: Do not forget to attach the jib ha-
lyard rope to the small single block at the end of
the jib halyard wire. Tie off the jib halyard wire
and rope near the base of the mast.
lyard rope to the small single block at the end of
the jib halyard wire. Tie off the jib halyard wire
and rope near the base of the mast.
3