Haier H CR1 7 Manuale Utente

1. Remove all packaging material. This includes the foam base and all adhesive 

tape holding the refrigerator accessories inside and outside. 

2. Inspect and remove any remains of packing, tape or printed materials before 

powering on the refrigerator.

t:PVSSFGSJHFSBUPSIBTUXPMFWFMJOHMFHTXIJDIBSFMPDBUFEJOUIFGSPOUCPUUPN

corners of your refrigerator. After properly placing your
refrigerator in its final position, you can level your refrigerator.

t-FWFMJOHMFHTDBOCFBEKVTUFECZUVSOJOHUIFNDMPDLXJTFUPSBJTFZPVS

refrigerator or by turning them counterclockwise to lower your refrigerator. The 
refrigerator door will close easier when the leveling legs are extended.

t5PFOTVSFZPVSSFGSJHFSBUPSXPSLTBUUIFNBYJNVNFGGJDJFODZJUXBTEFTJHOFE

for, you should install it in a location where there is proper air circulation, 
plumbing and electrical connections.

t5IFGPMMPXJOHBSFSFDPNNFOEFEDMFBSBODFTBSPVOEUIFSFGSJHFSBUPS

Sides……………. 4 "

(1 0 0 mm)

Top. . . . . . . . . . . . . . . . . . . . 4 "

(1 0 0 mm)

Ba ck. . . . . . . . . . . . . . . . . . 4 "

(1 0 0 mm)

1. Remove the top hinge cover by using a flathead 

screwdriver. Place the head under the front edge 
of the cap and gently lift.

2. Loosen the top hinge screws using a Phillips 

head screw driver. 

"EKVTUUIFEPPSPSQVUBTQBDFSJOCFUXFFOBOE

tighten the screws.

4. Replace the top hinge cover by aligning the rear 

of the cover with the rear of the hinge. Press 
firmly on the front of the

 cover until it snaps in 

place.

English

fig. 1