Haier H CR1 7 Manuale Utente

English

t.BLFTVSFUIFSFJTBTVJUBCMFQPXFSPVUMFU WPMUT BNQTPVUMFU XJUI

proper grounding to power the refrigerator. 

t"WPJEUIFVTFPGUISFFQSPOHBEBQUFSTPSDVUUJOHPGGUIFUIJSEHSPVOEJOHQSPOH

in order to accommodate a two prong outlet. This is a dangerous practice since 
it provides no effective grounding for the refrigerator and may result in shock 
hazard.

t"WPJEUIFVTFPGBOFYUFOTJPODPSECFDBVTFPGQPUFOUJBMTBGFUZIB[BSETVOEFS

certain conditions. If it is necessary to use an extension cord, use only a 3-wire 
extension cord that has a 3-blade grounding plug and a 3-slot outlet that will 
accept the plug. The marked rating of the extension cord must be equal to or 
greater than the electrical rating of the appliance.

t%POPUJOTUBMMZPVSSFGSJHFSBUPSJOBOZMPDBUJPOOPUQSPQFSMZJOTVMBUFEPSIFBUFE

e.g. garage, etc. Your refrigerator was not designed to operate in temperature 
settings below 55˚ Fahrenheit. 

t4FMFDUBTVJUBCMFMPDBUJPOGPSUIFSFGSJHFSBUPSPOBIBSEFWFOTVSGBDFBXBZ

from direct sunlight or heat source, e.g. radiators, baseboard heaters, cooking 
appliances, etc. Any floor unevenness should be corrected with the leveling legs 
located on the front bottom corners of the refrigerator.

NOTE: As the door gets pressed in during shipping, after reversing the door, the 

gasket may have to be reset. This is done to prevent the cool refrigerated 
air from escaping. If there is a gap between the door gasket and the 
cabinet, set the gasket by gently pulling it out to seal the gap.