Philips WP3810 Manuale Utente

Do not let water hotter than 50°C run through the water 

purifier, this may cause damage.

Do not let the water purifier freeze.
Before daily use
To prevent quick clogging of the filter cartridge, let the water run at 

the unfiltered setting for around 5 seconds before every use.

If the water is highly coloured or turbid due to work on your water 

network, do not let the water run at the filtered setting until the 

water is clear.

Cautions:

1  Let the water run at the filtered setting for 10 seconds before use 

each day.

2  Let the water run at the filtered setting for 60 seconds before use if 

you have not used the water purifier for more than two days.

3  If you have not used the water purifier for more than two weeks, let 

the water run at the filtered setting for 2-3 minutes before use. If the 

filter cartridge emits an unpleasant smell, replace it with a new one.
applications
Only use the water purifier to filter water that meets drinking water 

standards.

Do not block the filtered water outlet or connect other devices to it.

If the water pressure is very high, reduce the water flow of the tap to 

prevent damage to the cartridge.

Keep the water purifier away from heat to avoid distortion or 

breakage.

Do not tamper with the water purifier.

Do not remove the filter cartridge while you use the water purifier

Do not use the water purifier without a filter cartridge.

Do not place the water purifier near a window where it is exposed 

to direct sunlight.

This water purifier does not soften water.

Do not use filtered water in aquariums. Tap water, filtered or 

unfiltered, can be harmful to fish.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

7