Philips WP3810 Manuale Utente

Do not store purified water to avoid contamination. Air contact 

contaminates purified water quickly. If you want to store purified 

water, use a clean container and keep it in the refrigerator. Do not 

keep it in the refrigerator longer than 1 day to avoid contamination.

Philips’ multi-filtration system consists of a primary filter, a secondary 

filter, a high-tech hollow-fibre membrane filter and a granular 

activated carbon filter.

The hollow fibre membrane contains 520 billion micropores 

(WP3811) or  400 billion micropores (WP3810) that are small 

enough to remove particles down to 0.1µm. It eliminates 99.99%* of 

bacteria, rust and other particles larger than the micropore size 

from your tap water without removing calcium, magnesium and other 

minerals that are vital to your body. (* tested according to Japanese 

Water Purifier Association (JWPA) standard).

The granular activated carbon removes the unpleasant chlorine smell 

and taste from your tap water.

Apart from the recommended cartridge lifetime, Philips’ unique 

cartridge replacement indicator helps you determine when to replace 

the filter cartridge.

Before installation
Before you install the water purifier, make sure all tap-mounting 

adapters you require are present. 

The tap must have a diameter of 13mm-25mm.

Determine what type of tap you have and select the appropriate 

adapter.

The adapters supplied make the water purifier suitable for almost 

any kitchen tap. However, the water purifier may not fit some 

uncommon types of taps.

The tap water pressure has to be between 0.7kgf/cm² (7 metres of 

water column) and 3.5kgf/cm² (35 metres of water column). If you 

use the water purifier at a water pressure outside this range, either 

-

-

-

-

-

-

-

-

-

-