Acronis K/Backup & Recovery 10 Srv+5 Workst/DE KIT33100124739 Manuale Utente
Codici prodotto
KIT33100124739
180
Copyright © Acronis, Inc., 2000-2009
•
Windows PE 2005 (1.6) (Windows Server 2003 with Service Pack 1).
To add Acronis Plug-in to WinPE 1.x:
1. Install the Acronis Plug-in for WinPE from the Acronis Backup & Recovery 10 setup file.
2. Unpack all files of your WinPE 1.x ISO to a separate folder on the hard disk.
3. Select Acronis Win PE ISO Builder from the start menu.
4. Specify path to the folder with the WinPE files.
5. Specify path to the folder with the Acronis Plug-in files (check the registry key
HKEY_LOCAL_MACHINE\SOFTWARE\Acronis\WinPE\Settings\WinPE for the plug-in location.)
6. Specify the full path to the resulting ISO file including the file name.
7. Check your settings in the summary screen and click Proceed.
8. Burn the .ISO to CD or DVD using a third-party tool or copy to a flash drive.
Once a machine boots into the WinPE, Acronis Backup & Recovery 10 starts automatically.
Once a machine boots into the WinPE, Acronis Backup & Recovery 10 starts automatically.
6.8.1.3.
Adding the Acronis Plug-in to WinPE 2.x
Acronis WinPE ISO Builder provides three methods of integrating Acronis Backup & Recovery 10 with
WinPE 2.x:
WinPE 2.x:
•
Adding the Acronis Plug-in to the existing PE 2 ISO. This comes in handy when you have to add
the plug-in to the previously configured PE 2 ISO that is already in use.
the plug-in to the previously configured PE 2 ISO that is already in use.
•
Creating the PE 2 ISO with the plug-in from scratch.
•
Adding the Acronis Plug-in to a WIM file for any future purpose (manual ISO building, adding
other tools to the image and so on).
other tools to the image and so on).
To be able to perform any of the above operations, install Acronis WinPE ISO Builder on a machine
where Windows Automated Installation Kit (WAIK) is installed. If you do not have such machine,
prepare as described in How to create bootable media (p. 175).
where Windows Automated Installation Kit (WAIK) is installed. If you do not have such machine,
prepare as described in How to create bootable media (p. 175).
Acronis WinPE ISO Builder supports only x86 WinPE 2.x. This WnPE distribution can also work on x64 hardware.
A PE image based on Win PE 2.0 requires at least 256MB RAM to work. The recommended memory size for PE
2.0 is 512MB.
2.0 is 512MB.
Adding Acronis Plug-in to WinPE 2.x ISO
To add Acronis Plug-in to WinPE 2.x ISO:
1. Do one of the following:
When adding the plug-in to the existing Win PE 2 ISO, unpack all files of your Win PE 2 ISO to a
separate folder on the hard disk.
When creating a new PE 2 ISO:
select from the start menu Microsoft Windows AIK -> Windows PE Tools Command Prompt
separate folder on the hard disk.
When creating a new PE 2 ISO:
select from the start menu Microsoft Windows AIK -> Windows PE Tools Command Prompt