Acronis K/Backup & Recovery 10 Srv+5 Workst/DE KIT33100124739 Manuale Utente
Codici prodotto
KIT33100124739
182
Copyright © Acronis, Inc., 2000-2009
6.8.1.4.
Building Bart PE with Acronis Plug-in from Windows distribution
1. Get the Bart PE builder.
2. Install the Acronis WinPE ISO Builder from the Acronis Backup & Recovery 10 setup file.
3. Change the current folder to the folder where the Acronis Plug-in for WinPE is installed—by
default: C:\Program Files\Acronis\WinPE\WinPE.
If the plug-in is installed in a folder other than the default folder, change the path accordingly
(check the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Acronis\WinPE\Settings\WinPE for
the plug-in location.)
If the plug-in is installed in a folder other than the default folder, change the path accordingly
(check the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Acronis\WinPE\Settings\WinPE for
the plug-in location.)
4. Run the following command:
export_license.bat
5. Copy the contents of the current folder—by default: C:\Program Files\Acronis\WinPE\WinPE—to
the %BartPE folder%\plugins\Acronis.
6. Insert your Windows distribution CD if you do not have a copy of Windows installation files on
the HDD.
7. Start the Bart PE builder.
8. Specify the path to the Windows installation files or Windows distribution CD.
9. Click Plugins and check whether the Acronis plug-in is enabled. Enable if disabled.
10. Specify the output folder and the full path to the resulting ISO file including the file name or the
media to create.
11. Build the Bart PE.
12. Burn the ISO to CD or DVD (if this has not been done yet) or copy to a flash drive.
Once the machine boots into the Bart PE and you configure the network connection, select Go ->
System -> Storage -> Acronis Backup & Recovery 10 to start.
Once the machine boots into the Bart PE and you configure the network connection, select Go ->
System -> Storage -> Acronis Backup & Recovery 10 to start.
6.8.2. Connecting to a machine booted from media
Once a machine boots from bootable media, the machine terminal displays a startup window with
the IP address(es) obtained from DHCP or set according to the pre-configured values.
the IP address(es) obtained from DHCP or set according to the pre-configured values.
Remote connection
To connect to the machine remotely, select Connect -> Manage a remote machine in the console
menu and specify one of the machine's IP addresses. Provide the user name and password if
these have been configured when creating the bootable media.
menu and specify one of the machine's IP addresses. Provide the user name and password if
these have been configured when creating the bootable media.
Local connection
Acronis Backup & Recovery 10 Management Console is always present on the bootable media.
Anyone who has physical access to the machine terminal can run the console and connect. Just
click Run management console in the bootable agent startup window.
Anyone who has physical access to the machine terminal can run the console and connect. Just
click Run management console in the bootable agent startup window.