Nikon 9000ED Manuale Utente

Slide the mounts out from under the clips 
that hold them in place.

Do not use force when removing slides.  Fail-
ure to observe this precaution could damage 
the clips.  Do not lift the slides up until fully 
removed from the clips.

The FH-869M is used with medium-format (120/220, 2¼ or Brownie) slides with mounts 
1.0–3.2 mm  thick.  It is equipped with two apertures: a smaller aperture for 6 × 4.5 or 6 × 6 
slides and a larger aperture for  6 × 7,  6 × 8, and  6 × 9 slides.

Do not place mounted negatives in the holder with positive slides.

Insert the slides between the guides.  The 
slides should be oriented to match the ap-
ertures in the holder and the refl ective fi lm 
base should be up (

 26).  Stop when the 

slide contacts the base of the clips.

Insert slides between the guides.  Forcing 
the slides onto the guides could damage the 
slides or clips and prevent the scanner from 
focusing correctly.  To minimize resistance, 
try inserting slides at a slight angle.

Leaving slides in the holder for extended periods could damage the clips holding the slides in place.

Guides

Direction of 

insertion

Thumbnails 

displayed in 

order shown