Nikon 9000ED Manuale Utente

1 

Open the holder
Slide the latch in the direction shown 
and open the holder.

The FH-869G is used to scan medium-format fi lm (120/220, 2¼ or Brownie) and 59 × 82 mm 
electron-microscope fi lm.  The length of the fi lm strip that can be scanned depends on the 
type of fi lm:
• 6 × 4.5:  1–4  frames

• 6 × 6:  1–3  frames

• 6 × 7 – 6 × 9:  1–2  frames

If the fi lm is folded or twisted, Newton’s 
rings (a radial interference pattern) may 
appear when the fi lm is scanned.  This 
can be prevented by placing a masking 
sheet in the holder as shown at right.  
The aperture at the front of the masking 
sheet should match the fi lm frame size.

Place stickers between frames on the 
emulsion surface of the fi lm (no sticker is 
required between the fi rst two frames).  
The stickers can then be used to fasten 
the fi lm to the masking sheet.  Stickers 
can be reused.

Latch

Stickers

Emulsion 

surface

The inner surface of the glass cover been treated to prevent interference.  Avoid leaving fi ngerprints or 
other stains on the glass.

Place side 

with stickers 

down