Q-Logic 5802V Manuale Utente

5 – Switch Configuration

Managing Switch Configurations

5-14

59263-01  A

S

The following is an example of the 

 command. Refer to 

 for a description of the switch configuration parameters.

SANbox #> admin start

SANbox (admin) #> config edit

SANbox (admin-config) #> set config switch

  A list of attributes with formatting and default values will follow.

  Enter a new value or simply press the ENTER key to accept the current value.

  If you wish to terminate this process before reaching the end of the list

  press 'q' or 'Q' and the ENTER key to do so.

  AdminState          (1=Online, 2=Offline, 3=Diagnostics)   [Online        ]

  BroadcastEnabled    (True / False)                         [True          ]

  InbandEnabled       (True / False)                         [True          ]

  FDMIEnabled         (True / False)                         [True          ]

  FDMIEntries         (decimal value, 0-1000)                [1000          ]

  DefaultDomainID     (decimal value, 1-239)                 [2             ]

  DomainIDLock        (True / False)                         [False         ]

  SymbolicName        (string, max=32 chars)                 [SANbox        ]

  R_A_TOV             (decimal value, 100-100000 msec)       [10000         ]

  E_D_TOV             (decimal value, 10-20000 msec)         [2000          ]

  PrincipalPriority   (decimal value, 1-255)                 [254           ]

  ConfigDescription   (string, max=64 chars)                 [Default Config]

To make temporary changes to the switch administrative state, enter the 

 command.

Successful management of switches and fabrics depends on the effective use of 
switch configurations. Backing up and restoring a configuration is useful to protect 
your work or for use as a template in configuring other switches. Backing up and 
restoring the switch configuration involves the following:

„

„

„