Hoover cleaner Manuale Utente
8
Stair cleaning
A
stair cleaning handle
has been
designed for ease in using your cleaner
on stairs.
With handle in operating position, place
fingers under edge of stair cleaning
handle and guide cleaner with other
hand on upper handle.
As an alternative, you may use the hose
and furniture nozzle for stair cleaning.
on stairs.
With handle in operating position, place
fingers under edge of stair cleaning
handle and guide cleaner with other
hand on upper handle.
As an alternative, you may use the hose
and furniture nozzle for stair cleaning.
When using cleaning tools, the
agitator will continue to rotate.
agitator will continue to rotate.
CAUTION: To avoid personal injury or
unnecessary wear to carpet, and to
prevent the cleaner from falling, use
extra care if cleaner is placed on
stairs.
unnecessary wear to carpet, and to
prevent the cleaner from falling, use
extra care if cleaner is placed on
stairs.
Cleaning tools
Tools allow you to clean surfaces above
the floor and reach hard to clean areas.
If the tool caddy has been removed,
reposition it on the cleaner.
the floor and reach hard to clean areas.
If the tool caddy has been removed,
reposition it on the cleaner.
Use tools with the cleaner handle in
upright position.
upright position.
CAUTION: Agitator continues to rotate
while cleaner handle is in upright
position. Avoid tipping cleaner or
setting it on furniture, fringed area
rugs, or carpeted stairs during tool use.
while cleaner handle is in upright
position. Avoid tipping cleaner or
setting it on furniture, fringed area
rugs, or carpeted stairs during tool use.
A. Plug-in hose
Turn cleaner OFF before plugging-in
or removing hose.
or removing hose.
With cleaner handle in
upright position
,
open hose door and insert hose connec-
tor until it is locked in position. Suction
will automatically be diverted to the hose
when cleaner is turned ON.
tor until it is locked in position. Suction
will automatically be diverted to the hose
when cleaner is turned ON.
To remove hose, press latch on hose
connector and pull up.
connector and pull up.
Note: Hose must be removed from
hose door when cleaning carpet and
rugs to insure proper cleaning perfor-
mance.
hose door when cleaning carpet and
rugs to insure proper cleaning perfor-
mance.
2-9
2-11
2-12
2-10
A
B
C
D
B. Select proper cleaning
tool
tool
A. Dusting brush
can be used for
carved furniture, table tops, books,
lamps, lighting fixtures, venetian blinds,
baseboards, shutters, and registers.
lamps, lighting fixtures, venetian blinds,
baseboards, shutters, and registers.
B. Furniture nozzle
can be used
for upholstered furniture, draperies,
tapestries, mattresses, clothing,
automobile interiors, and carpeted stairs.
tapestries, mattresses, clothing,
automobile interiors, and carpeted stairs.
C. Crevice wand
can be used in tight
spaces, corners and along edges in such
places as dresser drawers, upholstered
furniture, stairs, and baseboards. It can
also be used for extra reach with the
dusting brush and/or extension wand.
places as dresser drawers, upholstered
furniture, stairs, and baseboards. It can
also be used for extra reach with the
dusting brush and/or extension wand.
D. Extension wand
is used to give extra
length to your hose. Attach it to any of
the above tools.
the above tools.
C. Attach wand and
tools
tools
The tools are attached to the hose or the
wand in the same manner.
Push tool firmly onto hose; twist tool
slightly to tighten or loosen connection.
wand in the same manner.
Push tool firmly onto hose; twist tool
slightly to tighten or loosen connection.
The dusting brush (A) also can be
attached to the crevice wand.
attached to the crevice wand.
How to clean tools
To clean the hose, wipe off dirt with a
cloth dampened in a liquid detergent.
Rinse with a damp cloth.
Cleaning tools may be washed in warm
water with a detergent. Rinse and air
dry before using.
cloth dampened in a liquid detergent.
Rinse with a damp cloth.
Cleaning tools may be washed in warm
water with a detergent. Rinse and air
dry before using.
A