SVAT Electronics CLEARVU11 Manuale Utente
SVAT ELECTRONICS
now you can see
CLEARVU11
35
E-MAIL SETUP
In Network Setup, press ENTER to
call up E-mail Setup as shown when
the highlighted option is E-mail.
call up E-mail Setup as shown when
the highlighted option is E-mail.
The E-mail Setup allows the administrator to set all e-mail related parameters. When an event occurs and E-mail is
enabled for the corresponding action, an e-mail will be sent based on the parameters set here. Contact ISP or E-mail
provider to acquire the SMTP server and authentication information.
enabled for the corresponding action, an e-mail will be sent based on the parameters set here. Contact ISP or E-mail
provider to acquire the SMTP server and authentication information.
The general operations are as below:
•
▲▼- Press these buttons to select the items.
• ESC (MENU/ESC) - Press this button to escape from this screen, and return to Network Setup display. If the
Save dialog is shown, press ENTER to exit and save, ESC (MENU/ESC) to exit without saving.
Following is a brief description for each item and its specific operations:
• SMTP Server – SMTP mail server name. Please contact your email provider for this information.
• Authentication – whether the SMTP mail server requires authentication. Press ENTER or +/- to check/
• Authentication – whether the SMTP mail server requires authentication. Press ENTER or +/- to check/
uncheck this item.
• Username – username if the SMTP mail server requires authentication.
• Password – password if the SMTP mail server requires authentication.
• Mail From – the e-mail address of this DVR unit, i.e. the sender of the e-mails
• Mail To #1-5 – the receivers’ e-mail addresses. The system can send the e-mails originated from the triggered
• Password – password if the SMTP mail server requires authentication.
• Mail From – the e-mail address of this DVR unit, i.e. the sender of the e-mails
• Mail To #1-5 – the receivers’ e-mail addresses. The system can send the e-mails originated from the triggered
events to up to 5 different receivers.
• Attachment – attached picture for the e-mail sent. The value could be (N/A, Original picture, QCIF picture).
Press +/- buttons to change this item.
MAIN MENU