SVAT Electronics CLEARVU11 User Manual

now you can see

CLEARVU11

35

In Network Setup, press ENTER to 
call up E-mail Setup as shown when 
the highlighted option is E-mail.

The E-mail Setup allows the administrator to set all e-mail related parameters. When an event occurs and E-mail is 
enabled for the corresponding action, an e-mail will be sent based on the parameters set here. Contact ISP or E-mail 
provider to acquire the SMTP server and authentication information.

The general operations are as below:

•

▲▼- Press these buttons to select the items.

•  ESC (MENU/ESC) - Press this button to escape from this screen, and return to Network Setup display. If the 

Save dialog is shown, press ENTER to exit and save, ESC (MENU/ESC) to exit without saving.

Following is a brief description for each item and its specific operations:

•  SMTP Server – SMTP mail server name. Please contact your email provider for this information.
•  Authentication – whether the SMTP mail server requires authentication. Press ENTER or +/- to check/

uncheck this item.

•  Username – username if the SMTP mail server requires authentication. 
•  Password – password if the SMTP mail server requires authentication. 
•  Mail From – the e-mail address of this DVR unit, i.e. the sender of the e-mails
•  Mail To #1-5 – the receivers’ e-mail addresses. The system can send the e-mails originated from the triggered 

events to up to 5 different receivers. 

•  Attachment – attached picture for the e-mail sent. The value could be (N/A, Original picture, QCIF picture). 

Press +/- buttons to change this item.