Elinchrom 73320 Manuale Utente

5

Security Advise
•  The maximum modelling lamp wattage for all Rotalux softboxes is 

limited to 300 W

•  Ensure that the Rotalux is correctly assembled and locked to the 

flash unit.

•  The unit, the flash tube and accessories may become very hot 

during and after use! To avoid injuries, handle with isolating cloth or 

wait until parts have cooled down.

•  Even though we use fire retardant materials; the fabric should 

never get in contact with the hot flash tube or the modelling lamp.

•  The metal Speed Ring and the locking knob for the revolving 

system may heat up enormously when the flash unit is used at 

maximum flash and modelling lamp power levels. Please wait until 

the parts have cooled down, before packing away.

•  Always switch the flash unit off before fitting or exchanging 

reflectors and softboxes.

•  Ensure that the ventilation system of flashunits is working correctly.

•  Double check that the internal fabric diffuser is correctly fitted and 

does not make contact with the hot flash tube and modelling lamp. 

•  Lower the modelling lamp power and reduce the number of flashes 

per minute, when small size softboxes are used, such as the 

Rotalux models 26178-26180-26181-26175. The reflective surface 

is very close to the modelling lamp/ flashtube. The fabric, can be 

damaged by excessive heat. 

•  Optional Rotagrids for direct lighting are available for the Rotalux 

70x70 cm, 60x80 cm and the 90x110 cm.

•  Lighttools™ offers a wide range of grids in different sizes and 

angles for Rotalux softboxes.

•  Adapter Speed Rings for other flash brands such as  Profoto™, 

Bowens™, Hensel™, Alien-Bees™ / Balcar™ are available soon. 

Adapters for additional brands are in process.