Draper Cinefold Dépliant

Assembly Instructions

Cinefold Portable Projection Screen by Draper

Frame

Hinges and
hinge locks

Handy Crank

Viewing
Surface

KE Adjustment
Knob

2" Min.
44" Max.

Anti-sway stabilizers
optional with HD legs

Standard T-Leg

Frame

Snaps

Handy Crank

Viewing
Surface

Bottom row of snap
studs to accept skirt

Standard T-Leg
Heavy duty legs optional

Frame/Screen Assembly

➀ Open carrying case and remove pouch containing screen

surface, and three aluminum assemblies. The largest

package is the frame. Unwrap and unfold it completely in

one direction only, locking all hinges. Frame should lie with

snaps facing up.

➁ Remove surface from its envelope. With male snaps at bot-

tom, snap surface to frame. For easier surface attachment,

start in one corner, then work your way around the frame.

Make sure snaps are secure.

Please note:

For steps 3-5, screen should remain on fl oor or

table, with surface facing up. Carefully lift screen from fl oor or
table to complete each step.

➂ Lock corner braces.

➃ Unfold leg assemblies and lock hinges. Check that ad-

just ment knob is in the hole desired (upper for vertical

screen position, lower for keystone elimination). DO NOT

unfold feet at this time.

➄ Attach legs to back side of vertical frame sections, as indi-

cated by the color coded markings, using Handy Cranks.

For standard screen height, match colored tapes exactly.

Height is adjustable in 6" increments.

➅ Raise Cinefold to a vertical position and unfold feet. Tighten ad just ment

knobs to maintain legs at desired angle. If your screen includes Heavy-

Duty Legs, unfold and lock the extensions on the backs of the feet, hinge

up to the backs of the leg, and attach with Handy Crank.

➆ If Anti-Sway stabilizers are supplied with your screen, refer to illustration

and attach with Handy Cranks.

A Note About Surfaces

➀ Always fold with snaps face-to-face. Do not permit screen fabric

to contact border material or snaps when folded. Store in pouch

provided.
➁ Take care at all times not to permit Cinefold viewing surface

to contact any dusty or dirty area, nor any varnished or painted

object.
➂ When necessary, clean Cinefold viewing surface with mild

soap and water. USE NO SOLVENTS! Surface must be com-

pletely dry before folding.

Caution

➀ Read instructions through completely before proceeding; retain for future
reference.

➁ Handle viewing surface with care; do not allow it to come in contact with
sharp or dirty objects.

➂ Use Handy Cranks provided; failure to do so may lead to screen damage.

➃ Make sure screen is level.

➄ Do not write on viewing surface.

Form Cinefold_Inst07

Printed in U.S.A.

Caution: Beware
of pinch points.

Caution: Make sure all hinges and joints are locked
before raising screen to standing position.

Caution: Make sure screen is
placed on level surface.