Draper Cinefold Dépliant

➀  Remove pouch containing viewing surface from case and set aside. 

Remove all aluminum assemblies.

➁  Unfold all folded aluminum assemblies completely, noting labels and 

color-coded marks. Lock all hinges. Position Stage Right and Stage Left 
sections in appropriate positions with snaps facing up. Top and Bottom 
sections should be set with snaps facing down.

➂  To increase frame rigidity, hinges on top and bottom frame sections have 

rivnuts marked with red and green. Insert a Handy Crank through the 
threadless rivnut (red) and tighten into the threaded rivnut (green).

➃  Apply small sections marked “Stiffener Bars” to back of Bottom frame 

section, using eight Handy Cranks each. Failure to use all Handy Cranks 
may result in damage to screen frame. Turn Bottom frame section over so 
snaps face up.

➄  If your screen frame is less than 25' wide, repeat step 4 for Top frame sec-

tion. Frames 25' wide and over are equipped with a special full-width Stiff-
ener for the top frame section. To attach it, place Stiffener fl at with green 
rivnuts face down. Place top frame section on top of and at right angles 
to Stiffener, over the green rivnuts. Insert and tighten standard Handy 
Cranks. Install 45° angle braces to the Top frame section and Stiffener with 

A.  Valance Bar attaches to frame with simple bayonet-style mounting.

B.  Draper Bars mount to Valance Bar, bayonet-style.

C.  Optional adjustable Skirt Bar is secured to frame at desired level with 

positive-locking plunger mechanism. If Skirt Bar is not used, Skirt may 
be snapped to bottom of viewing surface.

D. Valance, Drapes, and Skirt snap onto Mounting Bars.

Drapery

Bar

Valance Bar

Drapery

Bar

Adjustable Skirt Bar

Rigid

Truss

Frame

Anti-Sway

Stabilizers

Heavy-Duty

Legs

Frame & Legs

Assemble with

Handy Cranks

Handy Crank

➀  Read instructions through completely before proceeding; retain for 

future reference.

➁  Handle viewing surface with care; do not allow it to come in contact with 

sharp or dirty objects.

➂  Use Handy Cranks provided; failure to do so may lead to screen dam-

age.

➃  Make sure screen is level.

➄  Do not write on viewing surface.

short Handy Cranks. Turn Top frame so snaps face up.

➅  Join Top and Bottom to Stage Right and Stage Left, using two Handy 

Cranks on each of the four corners. Match numbers on white labels, and 
keep in mind that no Handy Crank should protrude outside screen frame.

➆  Remove surface from pouch. With the row of male snaps at bottom, posi-

tion screen surface over frame. Snap each of the four corners, then snap 
across bottom, up sides, and across top.

➇  Attach feet to inner side of legs with Handy Cranks, matching color-coded 

markings. Attach legs to Stage Right and Stage Left with Handy Cranks, 
matching colored tapes.

➈  Raise screen to a vertical position. Add Heavy-Duty Legs and Anti-Sway 

Stabilizers with Handy Cranks in the positions indicated below.

Copyright © 2008 Draper Inc. 

Form Cinefold_Inst08 

Printed in U.S.A.

®