Avaya 5620SW + EU24 Manuale Utente

Function Key Features 

Function Keys - Page 45 

IP Office (R3.0) 5620SW + EU24 User’s Guide 

Function Keys - Page 45 

40DHB0002USEP – Issue 1 (13th January 2005) 

Function Key Features 

Connects call to the extension without ringing.  

This function requires entry of an extension number when programmed. The target 
extension must be support handsfree operation. This function cannot be programmed 
through the phone by the user.  

Press 

 IAuto connects the call without any ringing at the remote extension. If the 

target extension is busy or not available, the call will follow any forwarding or diversion 
to voicemail set.  
 

[User | Digital Telephony | Emulation | Automatic Intercom] 
  

Sets the ringing pattern (sequence) used for internal calls.  

This function is currently not supported on the 5620 telephone. 
 

The same as IAuto - Automatic Intercom on page 45. This function cannot be 
programmed through the phone by the user.  
 

[User | Digital Telephony | Emulation | Dial Intercom] 

  

Intrudes on a call in progress at the target extension.  

This function is currently not supported on the 5620 telephone. 
 

Intrudes on a call in progress at the target extension, creating a conference between 
the callers and the intruding extension.  

This function requires entry of the target extension number when programmed. The 

 

Intru key shows the target extension number. This function cannot be programmed 
through the phone by the user.  

Pressing 

 Intru intrudes on the call in progress.  

Note:  That the System Administrator must configure the intruding extension as being 

able to intrude. Additionally none of the other extensions involved in the call can 
have "Cannot be intruded on" status.  
 

[User | Digital Telephony | Advanced | Call | Call Intrude]