Avaya 5620SW + EU24 Manuale Utente
Function Key Features
Function Keys - Page 47
IP Office (R3.0) 5620SW + EU24 User’s Guide
Function Keys - Page 47
40DHB0002USEP – Issue 1 (13th January 2005)
Function Key Features
NATim - Set No Answer Time
Sets the extension's no answer time after which ringing calls are forwarded or go to
voicemail.
This function requires the time in seconds to be entered when programmed. The value
is shown next to NATim. This function cannot be programmed through the phone by
the user.
Pressing
voicemail.
This function requires the time in seconds to be entered when programmed. The value
is shown next to NATim. This function cannot be programmed through the phone by
the user.
Pressing
NATim sets the extension's no answer time to the indicated number of
seconds. This time is used to set a delay between ending one call and the next call
ringing the extension (the waiting call may be indicated on the display however).
ringing the extension (the waiting call may be indicated on the display however).
[User | Digital Telephony | Advanced | Set | Set No Answer Time]
See also:
• VMOff - Voicemail Offon page 55.
• VMOff - Voicemail Offon page 55.
OCSeq - Set Outside Call Sequence
Sets the ringing pattern (sequence) used for internal calls.
This function is currently not supported on the 5620 telephone.
This function is currently not supported on the 5620 telephone.
Page - Page
Page the specified target extension or group. The target must be capable of hands-free
speech.
This function requires the target extension or group number to be specified when
programmed. The target is then shown next to
speech.
This function requires the target extension or group number to be specified when
programmed. The target is then shown next to
Page. This function cannot be
programmed through the phone by the user.
[User | Digital Telephony | Advanced | Dial | Dial Paging]
See also:
• GrpPg - Group Paging (!)on page 41.
• GrpPg - Group Paging (!)on page 41.
Park - Park (#)
Park calls to and retrieve calls from a specific park slot.
This function requires entry of a park slot number when programmed. That number and
Park then appears next to the
This function requires entry of a park slot number when programmed. That number and
Park then appears next to the
key. This function can be programmed through the
phone by the user using an
Admin 1 key.
The user can use the
key to park calls into that park slot and unpark calls from that
slot. Parked calls can also be retrieved with the Ride function (see page 52).
When a call is parked in that park slot by the user, a symbol appears next to the
When a call is parked in that park slot by the user, a symbol appears next to the
key and parked by another user, then Park is underlined.
[User | Digital Telephony | Park]
See also:
• CPark - Call Park (!) on page 34.
• CPark - Call Park (!) on page 34.