Avaya S8100 Manuale Utente

Install an S8100 with a CMC1 system cabinet

To mount a cabinet on a wall:

Place the template on the wall with the top surface level.

Mark 2 1/8-inch (0.3-cm) pilot holes to locate the mounting holes.

Remove the template from the wall.

Drill the 2 pilot holes.

Thread 2 #12 × 1-inch shoulder screws partially into the holes.

Set the cabinet onto the wall and align the slots with the shoulder screws. See 

 on page 353. Slide the cabinet to the left to hold it in place. Tighten the 

screws securely.

indmpnl3 KLC 110397

5" (12.7 cm)

12"

(30.5 cm)

54"

(137 cm)