Multi-Tech Systems iCell GPRS (MTSMC-G2-IP Manuale Utente
Part 6 – AT Commands for GPS-Enabled Devices
Chapter 16 – AT Commands for GPS-Enabled Devices
Universal IP AT Commands Reference Guide (Document S000457K)
93
#GPSURAIS – Set GPS Unique Remote Asset Identification String
Description:
This command is used to set a unique remote access identification string for each device or
vehicle.
vehicle.
Syntax:
AT#GPSURAIS="<value>"
AT#GPSURAIS? or AT#VGPS or AT#VALL
Values:
Up to 20 characters in an alphanumeric string
Note:
The ID precedes the GPSPREFIX.
Default:
" "
Responses:
OK
Otherwise ERROR
#GPSINTERVAL – Set GPS Server Transmission Interval
Description:
This command sets the interval of time between messages transmitted to the server.
Syntax:
AT#GPSINTERVAL=<value>
AT#GPSINTERVAL? or AT#VGPS or AT#VALL
Values:
0 to 65535 (seconds)
Default:
0 (Disabled)
Responses:
OK
Otherwise ERROR
#GPSPW – Set GPS Host Login Password
Description:
This command sets the GPS host login password, if required. Some GPS hosts may require a
simple password login mechanism.
simple password login mechanism.
Syntax:
AT#GPSPW="<value>"
AT#GPSPW? or AT#VGPS or AT#VALL
Values:
Alphanumeric ASCII text string up to 64 characters.
Default:
None
Responses:
OK
Otherwise ERROR
#GPSGPGGA – Enable/Disable GPGGA Message
Description:
This command enables or disables the reporting of NMEA GPGGA messages.
Syntax:
AT#GPSGPGGA =<value>
AT#GPSGPGGA? or AT#VGPS or AT#VALL
Values:
0
Disable
1
Enable
Default:
1
Responses:
OK
Otherwise ERROR