Manuali utente per Netgear m6100

Sommario

• M6100 Series Switches

  1
• Contents

  3
• 1. Get Started

  4
  • Available Publications

    5
  • Overview of the Access and Initial Configuration Options

    5
  • Prepare a Terminal and Access the Switch Through the Console Port

    5
    • Prepare a Terminal

      6
    • Access the Switch Through the Console Port

      6
  • Start the Switch and Observe the Power-On Self-Test

    7
  • Use the Network Interface, Service Port, or Console Port for Initial Configuration

    7
    • Perform Initial Configuration of the Switch Through a BootP or DHCP Server

      8
    • Perform Initial Configuration of Switch Through the Console Port

      8
    • Use ezconfig for Initial Configuration

      9
  • Use the Web Management Interface for Initial Configuration

    12
    • Overview of the Web Management Interface

      12
    • Use the Web Management Interface to Configure the Network Interface and Service Port

      13
    • Access the Web Management Interface When the Switch Is Already Connected to the Network

      15
    • Configure an SNMP V3 User Profile Over the Web Management Interface

      16
• 2. Use the Auto Install Configuration

  18
  • Auto Install Configuration Concepts

    19
  • Switch IP Address Assignment Concepts

    19
  • TFTP IP Address and Configuration File Name Concepts

    19
  • About Conflicting TFTP Server Configurations

    20
  • About DNS Server Requirements

    20
  • About Obtaining a Configuration File

    20
    • Host-Specific Configuration File

      20
    • Default Network Configuration File

      21
  • About Obtaining an Image from a TFTP Server Through Auto Install

    22
  • Configure Auto Install

    22
    • Configure Auto Install Through the CLI

      23
    • Configure Auto Install Through the Web Management Interface

      24
    • Monitor and Complete the Auto Install Process

      24
    • Event Logging for the Auto Install Process

      26
• 3. Register the Switch

  27