Manuali utente per Renesas RH850

Sommario

• Cover

  1
• Notice

  2
• PREFACE

  3
  • Contents

    4
• 1. PROGRAMMING GUI USAGE

  5
  • 1.1. Introduction

    5
  • 1.2. Startup of Programming GUI

    5
  • 1.3. Menu Bar

    9
    • 1.3.1. [File] menu

      9
      • (1) [Hex Editor...] command

        9
      • (2) [Upload from FP5...] command

        11
      • (3) [Checksum] command

        12
      • (4) [Quit] command

        14
    • 1.3.2. [Programmer] menu

      14
      • (1) [Setup host connection] command

        14
      • (2) [Logging] command

        15
      • (3) [Select Programming area] command

        16
      • (4) [Buzzer] command

        16
      • (5) [Reset] command

        16
      • (6) [Self-Test] command

        16
      • (7) [Update Firmware] command

        18
      • (8) [Update FPGA] command

        20
      • (9) [FP5 Manager] command

        24
    • 1.3.3. [Device] menu

      28
      • (1) [Blank check] command

        28
      • (2) [Erase] command

        28
      • (3) [Program] command

        29
      • (4) [Verify] command

        29
      • (5) [Read] command

        29
      • (6) [Set Security] command

        30
      • (7) [Checksum] command

        31
      • (8) [Autoprocedure(E.P.)] command

        32
      • (9) [Set Option bytes] command

        32
      • (10) [Set ID Code] command

        32
      • (11) [Connect] command

        32
      • (12) [Signature read] command

        32
      • (13) [Get Flash options] command

        32
      • (14) [Setup]

        34
    • 1.3.4. [Help] menu

      52
      • (1) [Help Topics] command

        52
      • (2) [About FP5] command

        52
  • 1.4. Toolbar

    53
  • 1.5. Action Log Window

    54
  • 1.6. Programming Parameter Window

    55
  • 1.7. Status Bar

    56
  • 1.8. Hint Bar

    56
• 2. EXAMPLE OF OPERATION USING PROGRAMMING GUI

  57
  • (1) Installation of programming GUI and USB driver

    57
  • (2) Installation of PR5 file

    57
  • (3) System connection

    57
  • (4) Connection of target system

    57
  • (5) Startup of programming GUI

    58
  • (6) Setting of programming environment

    61
  • (7) Execution of [Autoprocedure(E.P.)] command

    67
  • (8) System shutdown

    68
• Colophon

  69
• Address

  70
• Backcover

  71