Teledyne AX300-I ユーザーズマニュアル
Operation AX300-I
Teledyne
Analytical
Instruments
16
Figure 2-2: Sensor Cable Connection to Analyzer
Note: When the AX300-I instrument is used for diffusion
sampling (i.e., incubators, tents, etc.), the plastic flow
diverter must be removed from the R17MED sensor. If the
sensor is used in breathing circuits, etc, the diverter must
be used as shown in Figure 2-3.
diverter must be removed from the R17MED sensor. If the
sensor is used in breathing circuits, etc, the diverter must
be used as shown in Figure 2-3.
Figure 2-3: Mounting the Sensor in the Tee Adapter
2.1.2 Mounting
The AX300-I can be mounted in several ways depending on the
optional equipment ordered at the time of purchase. See Section 1.3.