Multiquip J-SERIES ユーザーズマニュアル

Before the trowel can be put into operation there are some
components that must be installed before the trowel can be used.
This section explains how to install those components.

1.

Install the 

handle tube to the gearbox as shown in Figure 5.

The mounting hardware should be contained in the shipping
container.

Quick Pitch™ Handle Installation (Quick Pitch Models Only)

The Quick Pitch™ handle is spring loaded,
personal injury or damage could result from
improper handling or installation. Be careful

when installing this component.

1.

Grasp the Quick Pitch™  

T-handle from the operator's

position and squeeze the blade pitch adjustment trigger.
Move the 

T-handle  towards the engine as far as possible

(Figure 6). This will compress the spring inside the handle
tube. Allowing maximum exposure of the pitch cable.

2.

Lock the spring in the compressed position, by releasing
the blade pitch adjustment trigger.

Considerable force may be required when
moving the Quick Pitch

™

    T-handle

forward or backward.