Jasco RM24914 ユーザーズマニュアル

6

Write your codes down here for easy reference later.

1.   Press and hold the 

SETUP button until the 

red indicator stays on, then release the

SETUP button.

2.   Press and release the desired device 

button (

TV, VCR, etc.). The red indicator 

blinks, then stays lit.  

3.  Enter the 4 digit code 

from the code tables 
(on separate sheet). 
Note: after a valid code 
entry, the red indicator 
turns off.  For an invalid 
code, the red indicator 
flashes.

4.  With your device on, press

. 

If the device turns off, no further 
programming is required. Note: If 
some buttons do not operate your 
equipment, try one of the other 
codes for your brand.

Device 

Device stored  Code

TV   

TV

CBL/SAT 
DVD
VCR