Jasco RM24914 ユーザーズマニュアル

7

If your device does not respond after you have tried 
all the codes for your brand, or if your brand is not 
listed, try searching for your code by following these 
steps.

1.  Manually turn on the device (

TV, VCR, etc.) to be 

controlled.

2.  Press and hold the 

SETUP button until 

the red indicator stays on, then release 
the 

SETUP button.

3.   Press and quickly release the desired 

device button (

TV, VCR, etc.). The red 

indicator blinks off once.

4.  Press the 

 button repeatedly 

(up to 300 times) until the device 
to be controlled turns off. The red 
indicator blinks off with each button 
press.

Most users will store VCR codes under the 

VCR button, 

Cable codes under 

CABLE, etc. If (for example) you 

want to store a VCR code under 

CABLE, first follow 

the procedure for Direct Code Entry (previous page) 
and press 

CABLE in step 2 of Direct Code Entry, then 

enter ANY VCR code in step 3 of Direct Code Entry. 
Then follow the steps above for Code Search.

Note:  Code Search starts from the currently stored 
four digit number under that mode. Sometimes the 
first code that “works” with your device may only 
allow limited functionality (e.g. the MENU button 
might not work). There may be a code that performs 
more functions. Continue the code search process 
until the best code is found.

.  Press and release 

ENTER to install the 

code.