Razor 13010800 ユーザーズマニュアル

       WaRNINg: Failure to 

properly engage the spring-loaded 

buttons may cause the handlebars 

to dislodge while riding and may 

cause you to lose control and 

fall. When correctly engaged the 

handlebars will not rotate nor will 

they move sideways. Note that 

when properly engaged, the spring-

loaded buttons are clearly visible in 

the holes on the T-bar.

 Make certain

 BOTH handlebars 

are properly locked onto the T-bar.

 Insert and secure the left and 

right handlebars by pressing the 

spring-loaded buttons and  

inserting them into the T-bar.

 To release the folding  

mechanism, put one foot on the 

deck plate and push joint release 

lever down. Raise handlebars up 

until securely locked in the upright 

position. 

Note: The joint lever is spring-

loaded and will automatically lock 

in the upright position when fully 

upright.

       WaRNINg: Keep 

your fingers clear of the pivoting 

mechanism when folding or

unfolding the scooter. Make sure 

others are standing clear.

Note: The tension of the quick-

release lever can be adjusted by 

tightening or loosening the Allen 

bolt. Be careful not to over-tighten. 

You should always be able to open 

and close the quick-release lever 

by hand and the T-bar should slide 

freely with the quick-release open.

q 

3

       WaRNINg: Failure to 

properly secure the quick-release 

lever may cause the T-bar to 

telescope up or down while riding 

which may cause you to lose 

control and fall. 

 To adjust the height of the handlebars, open the quick-release lever and 

slide the T-bar to the desired position and resecure the quick release lever to 

lock into place. If the T-bar is raised to the maximum height, depress the push

button located directly below the quick release lever to lower the T-bar.