Razor 13010800 ユーザーズマニュアル

4

Need Help? Visit www.razor.com for replacement parts, product support and a list of authorized 
service centers or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.

Insert the tapered end of the 

chalk into the spring. 

q 

       WaRNINg: Keep fingers 

clear of chalk bar hinge and fender 

brake. 

q 

Place one foot on the baseboard, push forward with the other foot. Steer. For enhanced cornering, lean slightly into the 

direction of the turn. For controlled stops, apply the brake by stepping on the rear fender/brake. Razor recommends that 

you practice applying the brake at various speeds and in an open area free from obstructions before riding your Razor 

around others.

When riding, place ball of foot on the chalk bar and apply pressure until the chalking mechanism clicks into place. Only 

use enough pressure to cause chalk to make a mark. To stop chalking, place ball of foot on chalk bar and apply pressure 

until it clicks to the desired position. 

q 

       WaRNINg: Applying too 

much pressure on the chalk bar may 

cause loss of control.

 Using any other part of 

the foot or full foot may activate the 

brake and prevent the chalk action.

Up Position - No chalking

Down Position - Chalking

Twist chalk clockwise 1/4 turn

until chalk is set securely in the 

spring. Periodically turn chalk as 

needed.  

 Chalk is non-toxic.

Conforms to ASTM4236.

Chalk washes off with water for 

easy clean-up.