A&D AD-4405 ユーザーズマニュアル

Page

AD-4405 Weighing Indicator

6. Functions

Functions

There are two parameters lists, one for the F-functions and one for the CF-functions.

These functions control the indicator. The parameters of each function are stored in

non-volatile memory, and are not lost even if power is turned off or cut off.

F-functions:

These parameters can always be changed and are used for internal settings.

CF-functions: If you accept a certificated approval of the weighing instruments, the CAL

cover (rear panel) must be sealed. Therefore, accepting this approval, the

parameters of the CF-function can not be changed.

6.1.

6.1. Changing the Function Settings

Changing the Function Settings

To enter the function settings, do either of the following.

1. When the display is off, press the

ON/OFF

key while pressing the

+/-

key.

2. When in the weighing mode, press both the

+/-

and

ON/OFF

keys at the same time.

When you are in the function setting, f00 will be displayed.
Operating Item
Step 1

Select an item using the

keys.

ENTER

key

The key to display a parameter of

the selected item.

Proceed to step 2.

ESC

key

To end function setting and enter

the weighing mode.

CAL

key

The key to exchange F-functions

and CF-functions.

Operating parameter
Step 2

Select a parameter using the

keys.

ENTER

key

The key to store a parameter

and return to step 1.

ESC

key

The key to return step 1

without changing the

parameter.

CLEAR

key

Change the display as default

value.(Type1)

Change sub item.(Type2, Type3)

Type2 and Type3 are indicated in the

parameter table.

Exit function setting

Press

ESC

key to go to the weight display when item number is displayed.

6. Functions

Weighing

+/-

NET/GROSS

ENTER

TARE

ESC

+/-

NET/GROSS

ENTER