Siemens XT55 ユーザーズマニュアル
XT55 AVL Software Instructions User’s Guide
Confidential/Preliminary
Confidential/Preliminary
s
m
o
b
i
l
e
XT55_avl_ug_V01
Page 16 of 20
15.03.2004
Example 3
$PSRF112,22*09
This command deletes all existing entries (phone numbers) in the list and disables
the remote tracking function.
$PSRF112,22*09
This command deletes all existing entries (phone numbers) in the list and disables
the remote tracking function.
Example 4
$PSRF112,23,2*16
This command displays the telephone number which is listed in the given position.
Responds: phone number 2: 012345678
$PSRF112,23,2*16
This command displays the telephone number which is listed in the given position.
Responds: phone number 2: 012345678
Enable the GSM functionality
$PSRF112,
30,
PIN
*XX
30,
PIN
*XX
Parameter description:
30:
//enable the GSM functionality (i.e. deactivate PIN request)
PIN:
//enter the PIN number of SIM card
*XX
//CheckSum has to be calculated.
Example 1:
$PSRF112,30,1111*26
This command enters the PIN number of SIM card also deactivate the PIN request
of SIM card.
$PSRF112,30,1111*26
This command enters the PIN number of SIM card also deactivate the PIN request
of SIM card.
Commands build in the history function
$PSRF112,
rawData,
value,
,*XX
rawData,
value,
,*XX
Parameter description:
rawData:
//configure the data format
Defined values
0 //request history in the NMEA format
1 //request history in the binary format
value:
//configure the history download procedure
*XX
//CheckSum has to be calculated.
Example 1:
$PSRF112,3,0*26
This command configures the module XT55 to send (upload) stored GPS history
either from a directly connected module XT55 or from one communicating via a
data connection in the NMEA format.
$PSRF112,3,0*26
This command configures the module XT55 to send (upload) stored GPS history
either from a directly connected module XT55 or from one communicating via a
data connection in the NMEA format.
Example 2:
$PSRF112,3,1*27
This command configures the module XT55 to send (upload) stored GPS history
either from a directly connected module XT55 or from one communicating via a
data line in the binary format.
$PSRF112,3,1*27
This command configures the module XT55 to send (upload) stored GPS history
either from a directly connected module XT55 or from one communicating via a
data line in the binary format.