Siemens XT55 ユーザーズマニュアル
XT55 AVL Software Instructions User’s Guide
Confidential/Preliminary
Confidential/Preliminary
s
m
o
b
i
l
e
XT55_avl_ug_V01
Page 17 of 20
15.03.2004
$PSRF112,
value,
*XX
value,
*XX
Parameter description:
value:
//configure history function
Defined values
1
//enables
history
2
//disables
history
*XX
//CheckSum has to be calculated.
Example 1:
$PSRF112,1*38
This command enables the history function. The module XT55 records every 180
seconds if the vehicle is driving faster than 10 km/h.
The settings 180 sec. and 10km/h are predefined parameters.
$PSRF112,1*38
This command enables the history function. The module XT55 records every 180
seconds if the vehicle is driving faster than 10 km/h.
The settings 180 sec. and 10km/h are predefined parameters.
Example 2:
$PSRF112,2*3B
This command disables the history function. No data will be saved in the history.
$PSRF112,2*3B
This command disables the history function. No data will be saved in the history.
Commands build in the alarm function
$PSRF112,
value,
key_number,
phone_number
*XX
value,
key_number,
phone_number
*XX
Parameter description:
value:
//configure the download procedure
Defined values
10 //enables key configuration
11 //disables key configuration
12 //displays key number
key_number
//determine the alarm key (1,2 possible)
phone_number
//set the authorized telephone number
*XX
//CheckSum has to be calculated.
Example 1:
$PSRF112,10,2,012345678 *02
This command enables key configuration as well the predefined RMC protocol is
send to the authorized telephone number (012345678) in case of an alarm on the
key 2.
$PSRF112,10,2,012345678 *02
This command enables key configuration as well the predefined RMC protocol is
send to the authorized telephone number (012345678) in case of an alarm on the
key 2.
Example 2:
$PSRF112,11,2*17
This command disables the key (2) configuration.
$PSRF112,11,2*17
This command disables the key (2) configuration.
Example 3:
$PSRF112,12,2*14
This command displays the settings of given key number (2).
The received format is: $alarm key (2): phone: 012345678, protocol: RMC
$PSRF112,12,2*14
This command displays the settings of given key number (2).
The received format is: $alarm key (2): phone: 012345678, protocol: RMC
Command for internal test
$PSRF111,
value,
*XX
value,
*XX
Parameter description:
value:
//commands overview
Defined value
0 //overview of all implemented test commands
*XX
//CheckSum has to be calculated.
Example 1:
$PSRF111,0*3A
$PSRF111,0*3A